Fulton County · Metro Atlanta
Concrete contractors in Milton, GA
Driveways, patios, slabs, stamped concrete and repairs in Milton. We come out, measure and leave you a free written estimate, then pour it on a date we agree with you.
Concrete work we do in Milton
- Concrete drivewaysWe pour new driveways, replace cracked and heaving ones, and extend driveways that are too tight for a second car, on a compacted base with the joints and finish done right.
- Concrete patiosFrom a simple pad for the grill to a full outdoor living area with steps, borders and a fire-pit pad, we pour patios that drain away from the house and look good for decades.
- Concrete slabs and foundationsConcrete slab contractors for garages, workshops, sheds, carports, hot tubs and additions, and concrete foundation contractors for slab foundations (monolithic and stem-wall) on new construction, poured to the plan and ready for inspection.
- Stamped and decorative concreteStamped patterns, integral color, exposed aggregate and borders for patios, driveways, pool decks and walkways: the look of stone or pavers in one solid slab.
- Walkways, sidewalks and stepsFront walks, side paths, pool surrounds, public sidewalk sections and poured steps, plain or finished to match the patio.
- Concrete repair and resurfacingCrack repair, slab lifting, resurfacing overlays and partial replacement for driveways, walks, patios and garage floors. We tell you honestly whether a repair will hold or the slab needs to go.
- Concrete retaining wallsPoured concrete and reinforced block retaining walls for slopes, driveways cut into a hill, raised patios and garden terraces, with the footing and drainage that keep them standing.
- Commercial concreteParking lots, loading areas, dumpster pads, sidewalks, curb and gutter, slabs and ADA ramps for businesses, HOAs, churches and property managers, scheduled around your operation.
Pouring concrete in Milton
Milton is a city of about 41,296 people in Fulton County, roughly 27 miles from Atlanta in Metro Atlanta. Most of what we pour here is driveways (new, replacement and extensions), patios and backyard slabs, with repairs and stamped work close behind. Our crews cover Milton and the rest of Fulton County, so the estimate visit and the pour are scheduled locally, not from across the state.
Water, soil and the ground under the slab
Before we price a job in Milton we look at where water goes today: downspouts that discharge onto the slab area, low corners that hold a puddle, edges that have washed out, and any old concrete that has already settled or heaved. Most of Georgia sits on clay that swells when wet and shrinks when dry, so the fix is in the preparation, not the mix: a compacted gravel base, a slope that sends water away from the house and the neighbor's lot, reinforcement sized to the load, and control joints on a planned layout. Where the ground has moved before, we say so in the estimate and tell you if a soils or foundation specialist should look first.
Permits in Milton
A driveway apron that meets a public street, a retaining wall above a certain height and any slab that carries a building usually need a permit from the City of Milton or Fulton County. Rules differ from one Georgia jurisdiction to the next. We tell you at the estimate which permits apply to your job, and pulling them is part of the work, not an extra you have to chase.
Concrete prices in Milton
We don't publish Milton-specific prices, and we don't invent them: the price for concrete work in Milton depends on your site, so we measure first. Our cost guides give national ranges from cited sources: about $5 to $8 per square foot for a plain driveway or patio, $10 to $20 and up for stamped concrete, and $10.63 to $13.00 for a basic installed slab. Size your project with the concrete calculator, then compare our written estimate line by line against those ranges.
Concrete conditions in Milton
Averages from the nearest NOAA climate normals station, Cumming 2N, GA (12.1 miles away, 1,140 ft), over 1991–2020.[1] Conditions can change over short distances, so treat these as a planning guide, not a forecast.
- Nights at 32°F or below
- 67
- Days at 90°F or above
- 32
- Precipitation a year
- 56 in
- Average temperature
- 60°F
Heat and drying
Summer brings about 32 days at 90°F or hotter, 28 of them in June–August. High temperatures speed up setting and drying, which raises the risk of plastic shrinkage cracks. For a summer pour we schedule outside the hottest part of the day and protect the slab from drying too fast. NRMCA's hot-weather guidance covers retarders, early starts and curing.[4]
Cold and freeze-thaw
Freeze-thaw is a real risk for outdoor concrete in Milton. Concrete that is wet when it freezes, especially where deicers are used, can scale. NRMCA recommends air-entrained concrete, about 6 percent total air with ¾- to 1-inch aggregate, and a specified strength of 4,000 psi for exterior slabs exposed to freezing and deicers. We write the specified strength and air content into the estimate. Freezing lows are not only a midwinter issue here: about 19 of them fall in March–May and September–November, so spring and fall pours need a plan for cold nights too. ACI calls for cold-weather precautions when air temperatures are expected to fall below 40°F during the protection period.[2, 3]
With 56 inches of precipitation a year, we plan how fresh concrete gets covered if rain arrives during or soon after the pour, and slope the finished slab to shed water away from the house.
Planning guides: pouring in summer heat · pouring in cold weather · curing times · driveway thickness
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020 (annual and seasonal, by station) (archive c20230404; imported November 6, 2026), station USC00092408.
- National Ready Mixed Concrete Association, CIP 2: Scaling Concrete Surfaces (checked October 30, 2026).
- American Concrete Institute, ACI 306R-16: Guide to Cold Weather Concreting (preview) (2016 edition; checked October 6, 2026).
- National Ready Mixed Concrete Association, CIP 12: Hot Weather Concreting (checked October 30, 2026).
What to have ready for your Milton estimate
None of it is required to send the request. It just makes the callback shorter and the estimate more accurate.
- The property address, so we can check the permit office and get the right crew
- Rough dimensions: pace it out, or size it with our concrete calculator
- What it's for: cars, a work truck, a hot tub, a shed, foot traffic
- A couple of photos of the area and the route a concrete truck would take
- Anything you've noticed about water: puddles, a downspout, a low corner
- When you'd like it done
Questions from Milton homeowners
How do I get a concrete estimate in Milton?
+
Fill in the form on this page with the type of project, your ZIP code, rough size and timing. We call to schedule, then come out to Milton, measure and leave you a written, itemized estimate. It's free.
Do you pull permits in Milton?
+
Yes. Driveway aprons, retaining walls above a certain height and structural slabs usually need a permit from the City of Milton or Fulton County. We tell you which apply to your job and handle them.
What does a concrete driveway cost in Milton?
+
We don't publish Milton-specific prices. Nationally, plain concrete driveways run about $5 to $8 per square foot installed and decorative finishes $8 to $21 (ConcreteNetwork, 2026). Your written estimate, with tear-out, base and finish itemized, is the real number.
How soon can you pour in Milton?
+
Estimates usually happen within a few days of your request. The pour date depends on the season and the schedule; we agree it with you when you accept the estimate, and we plan it around the weather.
Why homeowners choose us
A written estimate you can compare
Thickness, base depth, reinforcement and finish are spelled out line by line, so you can hold any other quote against it.
One call, then a date
We call back to confirm the details, usually the same business day, and book the visit at a time that suits you. No chasing.
Insured crews, permits pulled
General liability insurance on every job, the certificate with your estimate, and we pull the permits your city or county requires.